The ultimate non-slip surface
Royal Navy approved
The ultimate non-slip surface
Royal Navy approved
A three-component epoxy floor paint giving the ultimate anti-skid surface. Suitable for primed metallic & concrete substrates. Approved to UK Defence Standard 80-134/1 for Royal Navy flight, hangar & weather decks. Can be used on helidecks, walkways, ramps, weigh bridge decks and decks in general where abrasion resistance and non-slip properties are required. One kit covers approximately 10 square meters, and is best applied using a hopper gun.
Kit with Standard Comp B - 9 litres
Kit with Wintergrade Comp B - 9.3 litres
Available in five colours. See Manual, Data sheet & Application guide (under Guides tab below) for full details.
Feature | Details |
---|---|
Brand | Jotun |
Paint Protection | Anti-Corrosive |
Paint Type | Deck paint |
Paint Components | 2-Pack |
Ease of Use | 4. Fair |
Substrate Suitability | Stainless Steel, Mild Steel, GRP, Galvanised Steel, Concrete, Aluminium |
Surface Adhesion | 1. Excellent |
Above / Below Waterline | Above Water |
Water Resistance | 2. Very Good |
Abrasion Resistance | 1. Excellent |
Chemical Resistance | 2. Very Good |
Solvent Resistance | 3. Good |
Interior / Exterior Use | Exterior |
UV Resistance | 4. Fair |
Gloss Level | 3. Semi-gloss |
Gloss Retention | 4. Fair |
Colour Retention | 4. Fair |
Flexibility | 3. Good |
Application Method | Hopper Gun |
Recommended Coats (Brush / Roller) | 1 |
Chemical Composition | Epoxy |
Brand Range | Jota Armour |
Brush or Roller Coverage Rate (m2 / L) | 1 |
Cured for Service 10C (days) | 14 |
Cured for Service 23C (days) | 4 |
Dry to Overcoat 10C (hours) | 24 |
Dry to Overcoat 23C (hours) | 8 |
Full Curing Time 10C (days) | 14 |
Full Curing Time 23C (days) | 4 |
Max Dry Film Thickness per Coat (microns) | 3000 |
Max Overcoating Time without Sanding (days) | 5 |
Min Dry Film Thickness per Coat (microns) | 750 |
Pot Life 10C (hours) | 2 |
Pot Life 23C (hours) | 1 |
Product Type | Paint |
Self-Priming | Yes |