.png)
Jotun Marathon 550 is a 2-component surface tolerant epoxy primer that can be applied on moist substrates. It continues to cure when immersed in water and provides high abrasion resistance. Suitable for environments with very high corrosivity, such as areas in the splash or tidal zone. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium and concrete substrates.
Available in 4.5L and 18L tins and over 200 colours
Jotun Marathon 550 is a 2-component surface tolerant epoxy primer that can be applied on moist substrates. It continues to cure when immersed in water and provides high abrasion resistance. Suitable for environments with very high corrosivity, such as areas in the splash or tidal zone. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium and concrete substrates.
Available in 4.5L and 18L tins and over 200 colours
| Feature | Details |
|---|---|
| Brand | Jotun |
| Paint Protection | Anti-Corrosive |
| Paint Type | Primer |
| Paint Components | 2-Pack |
| Ease of Use | 3. Good |
| Substrate Suitability | Stainless Steel, Mild Steel, GRP, Galvanised Steel, Concrete, Aluminium |
| Surface Adhesion | 1. Excellent |
| Above / Below Waterline | Below Water, Above Water |
| Water Resistance | 1. Excellent |
| Abrasion Resistance | 1. Excellent |
| Chemical Resistance | 3. Good |
| Solvent Resistance | 3. Good |
| Interior / Exterior Use | Exterior |
| UV Resistance | 3. Good |
| Gloss Level | 2. Gloss |
| Gloss Retention | 4. Fair |
| Colour Retention | 3. Good |
| Flexibility | 3. Good |
| Application Method | Airless Spray, Brush, Roller |
| Recommended Coats (Brush / Roller) | 2-3 |
| Chemical Composition | Epoxy |
| Brand Range | Marathon |
| Brush or Roller Coverage Rate (m2 / L) | 8 |
| Cured for Service 10C (days) | 10 |
| Cured for Service 23C (days) | 7 |
| Dry to Overcoat 10C (hours) | 18 |
| Dry to Overcoat 23C (hours) | 8 |
| Full Curing Time 10C (days) | 10 |
| Full Curing Time 23C (days) | 7 |
| Max Dry Film Thickness per Coat (microns) | 550 |
| Max Overcoating Time without Sanding (days) | Refer to data sheet |
| Min Dry Film Thickness per Coat (microns) | 200 |
| Pot Life 10C (hours) | 1.5 |
| Pot Life 23C (hours) | 1 |
| Product Type | Paint |
| Self-Priming | No |
