Jotun Penguard Primer is a high-molecular-weight epoxy primer, offering excellent adhesion and corrosion protection. Suitable for properly prepared carbon steel, stainless steel, aluminium, concrete, galvanised steel, shop-primed steel, and thermally sprayed zinc substrates, it can be used in both atmospheric and immersed environments. Typically used as a first coat coat on bare substrates to improve adhesion of subsequent coats.
Available from SML Paints in 5L and 20L paints, in both red and grey colours
Jotun Penguard Primer is a high-molecular-weight epoxy primer, offering excellent adhesion and corrosion protection. Suitable for properly prepared carbon steel, stainless steel, aluminium, concrete, galvanised steel, shop-primed steel, and thermally sprayed zinc substrates, it can be used in both atmospheric and immersed environments. Typically used as a first coat coat on bare substrates to improve adhesion of subsequent coats.
Available from SML Paints in 5L and 20L paints, in both red and grey colours
Select an Option Below
| Feature | Details |
|---|---|
| Brand | Jotun |
| Paint Protection | Anti-Corrosive |
| Paint Type | Primer |
| Paint Components | 2-Pack |
| Ease of Use | 3. Good |
| Substrate Suitability | Wood, Stainless Steel, Mild Steel, GRP, Galvanised Steel, Concrete, Aluminium |
| Surface Adhesion | 1. Excellent |
| Above / Below Waterline | Below Water, Above Water |
| Water Resistance | 2. Very Good |
| Abrasion Resistance | 2. Very Good |
| Chemical Resistance | 1. Excellent |
| Solvent Resistance | 1. Excellent |
| Interior / Exterior Use | Exterior, Interior |
| Gloss Level | 5. Matt |
| Gloss Retention | 4. Fair |
| Flexibility | 3. Good |
| Application Method | Airless Spray, Brush, Roller |
| Recommended Coats (Brush / Roller) | 1 |
| Chemical Composition | Epoxy |
| Brand Range | Penguard |
| Brush or Roller Coverage Rate (m2 / L) | 10 |
| Cured for Service 10C (days) | 14 |
| Cured for Service 23C (days) | 7 |
| Dry to Overcoat 10C (hours) | 8 |
| Dry to Overcoat 23C (hours) | 4 |
| Full Curing Time 10C (days) | 14 |
| Full Curing Time 23C (days) | 7 |
| Max Dry Film Thickness per Coat (microns) | 60 |
| Max Overcoating Time without Sanding (days) | Refer to data sheet |
| Min Dry Film Thickness per Coat (microns) | 40 |
| Pot Life 10C (hours) | 10 |
| Pot Life 23C (hours) | 8 |
| Product Type | Paint |
| Self-Priming | No |
