Jotun Penguard Topcoat is a two-component, polyamide-cured epoxy coating with a glossy finish, offering excellent surface adhesion, chemical and solvent resistance. Ideal for use as a topcoat both above and below the waterline, it is particularly suitable for areas with limited UV exposure or where long-term cosmetic appearance is not critical. It can be applied over any primer in the Penguard range. Use Penguard Low Temperature Additive to enable curing at temperatures below 10C.
Available from SML Paints in 5L and 20L pack sizes and in over 450 colours
Jotun Penguard Topcoat is a two-component, polyamide-cured epoxy coating with a glossy finish, offering excellent surface adhesion, chemical and solvent resistance. Ideal for use as a topcoat both above and below the waterline, it is particularly suitable for areas with limited UV exposure or where long-term cosmetic appearance is not critical. It can be applied over any primer in the Penguard range. Use Penguard Low Temperature Additive to enable curing at temperatures below 10C.
Available from SML Paints in 5L and 20L pack sizes and in over 450 colours
| Feature | Details |
|---|---|
| Brand | Jotun |
| Paint Protection | Anti-Corrosive |
| Paint Type | Topcoat |
| Paint Components | 2-Pack |
| Ease of Use | 3. Good |
| Substrate Suitability | Stainless Steel, Mild Steel, GRP, Galvanised Steel, Concrete, Aluminium |
| Surface Adhesion | 1. Excellent |
| Above / Below Waterline | Above Water, Below Water |
| Water Resistance | 2. Very Good |
| Abrasion Resistance | 5. Limited |
| Chemical Resistance | 1. Excellent |
| Solvent Resistance | 1. Excellent |
| Interior / Exterior Use | Exterior, Interior |
| UV Resistance | 4. Fair |
| Gloss Level | 1. High Gloss |
| Gloss Retention | 4. Fair |
| Colour Retention | 4. Fair |
| Flexibility | 3. Good |
| Application Method | Airless Spray, Brush, Conventional Airspray, Roller |
| Recommended Coats (Brush / Roller) | 1-2 |
| Chemical Composition | Epoxy |
| Brand Range | Penguard |
| Brush or Roller Coverage Rate (m2 / L) | 10 |
| Cured for Service 10C (days) | 14 |
| Cured for Service 23C (days) | 7 |
| Dry to Overcoat 10C (hours) | 14 |
| Dry to Overcoat 23C (hours) | 7 |
| Full Curing Time 10C (days) | 14 |
| Full Curing Time 23C (days) | 7 |
| Max Dry Film Thickness per Coat (microns) | 60 |
| Max Overcoating Time without Sanding (days) | 90 |
| Min Dry Film Thickness per Coat (microns) | 40 |
| Pot Life 10C (hours) | 5 |
| Pot Life 23C (hours) | 4 |
| Product Type | Paint |
| Self-Priming | No |
