Solvalitt Midtherm is a one component physically drying silicone acrylic coating. It is heat resistant up to 600 °C
Solvalitt Midtherm is a one component physically drying silicone acrylic coating. It is heat resistant up to 600 °C
This is a one component physically drying silicone acrylic coating. It is heat resistant up to 600 °C. Can be used
as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel,
galvanised steel, stainless steel and aluminium substrates.
| Feature | Details |
|---|---|
| Brand | Jotun |
| Paint Protection | Heat-Resistant |
| Paint Type | Universal Coating |
| Paint Components | Single Pack |
| Ease of Use | 2. Very Good |
| Substrate Suitability | Mild Steel |
| Surface Adhesion | 2. Very Good |
| Above / Below Waterline | Above Water |
| Water Resistance | 3. Good |
| Abrasion Resistance | 3. Good |
| Chemical Resistance | 5. Limited |
| Solvent Resistance | 5. Limited |
| Interior / Exterior Use | Interior, Exterior |
| UV Resistance | 3. Good |
| Gloss Level | 4. Satin |
| Gloss Retention | 3. Good |
| Colour Retention | 3. Good |
| Flexibility | 3. Good |
| Application Method | Airless Spray, Roller, Brush, Conventional Airspray |
| Recommended Coats (Brush / Roller) | 1-2 |
| Chemical Composition | Silicone |
| Brand Range | Solvalitt |
| Brush or Roller Coverage Rate (m2 / L) | 15 |
| Cured for Service 10C (days) | 1 |
| Cured for Service 23C (days) | 1 |
| Dry to Overcoat 10C (hours) | 5 |
| Dry to Overcoat 23C (hours) | 4 |
| Full Curing Time 10C (days) | 1 |
| Full Curing Time 23C (days) | 1 |
| Max Dry Film Thickness per Coat (microns) | 30 |
| Max Overcoating Time without Sanding (days) | Extended |
| Min Dry Film Thickness per Coat (microns) | 20 |
| Product Type | Paint |
| Self-Priming | Yes |
